The Fronius Transsteel 2700c is one of the range of welding machines supplied and serviced by Camarc Welding.

Three Processes On All Devices

The Fronius TransSteel 2700c has the ability to switch between MIG/MAG, TIG, and MMA welding without any compromises with the individual welding processes and switching between the processes takes less than a minute.

Countless Applications

The TransSteel 2700c is suitable for five materials (steel, AlMg, AlSi, CuSi, CrNi) with a range of  0.3 – 8 mm material thickness. Seven different gas mixtures can be used as well as six different wire diameters

Ready To Weld In Three Steps

The Fronius TransSteel 2700c features an intuitive operating concept, all important parameters can be viewed and adjusted on the front panel and additional settings options in the submenu

Spec Table

  • MIG/MAG Welding Current Range: 10-270A
  • MMA Welding Current Range: 10-270A
  • TIG Welding Current Range: 10-270A
  • MIG/MAG Output Voltage Range: 14.5 – 27.5 V
  • MMA Output Voltage Range: 20.4 – 30.8 V
  • TIG Output Voltage Range: 10.4 – 20.8 V
  • Dimension (L x W x H): 687 x 276 x 445mm
  • Weight: 30kg

Email us at or phone us on 01530 831444 for help or advice

Leave a Reply

Your email address will not be published.